THE WORKS PRO Sealant & Adhesive
Geocel THE WORKS PRO is a high performance sealant and adhesive, which can be used internally or externally on almost any surface and in wet or dry conditions. Using THE WORKS PRO, there is no shrinking, no staining, no solvents and no need for additional fixings for most applications.
Product info
Benefits
- Use on wet or dry surfaces
- Cures underwater
- Bonds and seals virtually any material
- Paintable
- Resists mould growth
- Excellent service temperature range
- Excellent resistance to UV
Substrate Type
- Wood
- Metal
- Glass
- Stone
- Plastic
- Masonry
- Polystyrene
- Concrete
- Brick
- Tile
- Plaster
- Wet surfaces
Colours
Grey
Brown
Black
Beige
Clear
Oak
White
Introducing THE WORKS PRO
Technical Information
| Where to use | Interior/Exterior |
| Paintable | Yes |
| Skin Overtime | 15 min |
| Time to cure | 24 hours |
| Time to cure disclaimer | 3mm per 24 hours |
| Container Type | Cartridge |
| Shelf life | 1 year |
| Sizes | 290 ml |
| Application method | Sealant Gun and Cartridge |
Application
Surface Preparation
Ensure substrates, gaps and cracks are clean and free from dust, dirt and grease.
Application Instructions
Remove nozzle and cut off the tip of the cartridge. Replace the nozzle and cut the tip to the required width at a 45 degree angle. To secure: Apply Geocel The Works Pro in dots or beads. Once applied, surfaces should be firmly pressed together. To seal: Apply a continuous bead of Geocel The Works Pro ensuring it makes full contact with the sides and back of the joint. Tool within 5 minutes for a professional finish.
Clean up
Uncured sealant can be removed with THE WORKS Spray Multi Use Cleaner or a suitable solvent.
Supporting Documents
Quantity Estimator
Enter joint dimensions below to estimate number of cartridges required
You will require x cartridge
