DuPont Great Stuff™ Pro Gun Foam Fixer Kit
DuPont Great Stuff™ Pro Gun Foam Fixer Window & Door Kit is a special kit with 5* 750ml cans of Window & Door Foam Fixer, 1* foam application gun and 1* 500ml of PU Foam Gun Cleaner. The ultimate kit for fixing window and door frames.
Product info
Benefits
- Low expansion, fast cure
- Lasting bond, excellent cell structure gives improved insulation and a cleaner cut
- Ready to use, fast curing, high performance, one component material
- Gun application – improves accuracy with finer bead, less waste and multi session usage
- Self moulding to surface irregularities
Technical Information
| Where to use | Interior/Exterior |
| Paintable | Yes |
| Sizes | Pack including 5x 750ml Dupont Great Stuff Pro Gun Foam Fixer,1x Great Stuff Pro Gun,1x Great Stuff Pro Gun Cleaner. |
| Application method | Gun |
Application
Application Instructions
Shake the can vigorously for 30 seconds. Screw the threaded basket end of the gun onto the valve. Care must be taken not to over tighten the dispensing assembly. During processing, the can must be held inverted with the valve in bottom position. To extrude the foam, pressure has to be carefully applied to the gun trigger. The gun trigger can be adjusted by turning the round knob at the rear of the gun dispenser. The fresh foam will expand after application, therefore care must be taken not to overfill joints. Please note: Moisture is needed for an even and rapid curing of the foam. Inadequate moistening or overfilling of joints and cavities may lead to poor cure or unwanted excessive post-expansion of the foam. In the case of gaps larger than 3 x 3 cm, it is recommended to fill by applying several layers of foam, allowing each to cure.